AUTODEN ECO LAB DENSITY METER V1.1.

Technical Exagon

12535

The definitive solution for measuring apparent density WITHOUT MERCURY.

The Autoden Eco Lab V.1.01 machine is an apparent density measuring tool, which replaces the mercury dip measuring system.

Servitech needs the information below to prepare your budget.
If not provided now, our sales team will contact you later.

The machine has a loading area where the operator places the sample to be measured. The system introduces the sample into the measuring chamber, where its volume is estimated. The volume value divides the weight (previously obtained by the equipment itself), obtaining the apparent density value expressed in g/cm³.

A máquina funciona de forma totalmente autônoma, calculando o peso e o volume das amostras individualmente. Sua incerteza é < 0,005 g/cm³ e funciona ao nível do mercúrio.

The machine is calibrated using a standard of known volume and weight.

At the end of each measurement, there is the possibility of issuing a report using a thermal printer connected to the PLC.

H₂O measurement system.
Measurement uncertainty: ±0.005 g/cm³
It works on the mercury (Hg) scale.
Measuring speed: 15 seconds/sample.
Maintains accuracy even if the sample is broken or poorly cut.
Designed to work in industrial environments.
Self-calibrating equipment.
Always keep the scale with Mercury 1:1.
Manufactured with high-resistance industrial components.
Prints and saves the results in a database.
High reliability and low maintenance.

The Autoden Eco Lab machine consists of the following parts

Screen and keyboard: Part of the machine interface. The keyboard is industrial, which means it has an IP60 rating (suitable for industrial environments). From the screen, the operator controls the machine and views the results.

Balance: It is the area where the sample is placed to measure its mass. The balance measures the samples expressing the result in grams and with two decimal places (hundredths of a gram). For example, 25.12 g.

Sample loading area: It consists of a cursor where we place the samples after their mass has been measured. The slider itself includes an internal standard piece through which the machine calculates the reference volume of the Measuring Chamber.

Thrust system: It is responsible for inserting fluid into the Calculation Chamber and measuring excess liquid depending on the part.

Industrial automaton (PLC): Contains the Control Software (designed expressly for the machine). It is a PLC manufactured for industrial environments with a state-of-the-art processor. It can be connected to a thermal printer where measurement results are printed. Controls the movements of each part of the equipment.