![Servitech - Logo [Com Tagline]](https://servitech.com.br/wp-content/webp-express/webp-images/uploads/elementor/thumbs/Servitech-Logo-Com-Tagline-scaled-r94roux2gbrsca804jn1hmc3mf7m3lxhhdcrmk60po.png.webp "Servitech – Logo [Com Tagline]"){kind=logo}
Porosimeter 50 pieces CT-12174
This equipment is intended for vacuum testing of ceramic parts. This method is based on the infiltration of water into the open pores of the pieces, causing them to become full. The entire cycle is reproduced automatically through an electronic control unit, where tests are programmed based on the desired standard.
Servitech needs the information below to prepare your budget.
If not provided now, our sales team will contact you later.
• Built in 1020 zinc-plated steel, with epoxy paint;
• Single-phase Vacuum Pump 220V 50/60hz – 0.37Kw – 70L / min;
• Rotation of 1700rpm;
• Voltage and frequency: 220V single phase 50/60hz;
• Net weight: 200Kg;
• Dimensions: L=1170mm W=980mm H=1100mm;
• Comes with bench;
• Stainless steel tank, vacuum chamber;
• Auxiliary tank, water reservoir with float;
• Pump vacuum generation system;
• Basket for arranging ceramic pieces;
• Useful dimensions for vacuum chamber Ø 620 x 250mm;
• For 50 pieces 205 x 205mm;
• Complies with NBR 13818 and ISO 10545;
Machine according to standard NR12 composed of
• With 01 Electrical Panel composed of:
• General key;
• Reset button;
• Emergency button monitored by safety relay;
• Power Redundancy;
• 24V control;
• PLC with HMI to activate the process.
Equipment suitable for Brazilian Safety Standard NR12
